| 20% Solids High Gloss
Floor Finish
|
| Ingredients: |
Wt.% |
| Water |
83.9 |
| Alkali Soluble Resin solution |
12.7 |
| Ammonium Hydroxide |
0.5 |
| Tributoxyethyl phosphate |
2.0 |
| Masurf FS-710 |
0.2 |
| Zinc Oxide |
0.4 |
| Acrylic Emulsion Polymer solution. |
27.0 |
| Zinc Ammonium Carbonate |
1.7 |
| Ethyleneglycol monoethyl ether |
2.5 |
| Polyethylene Wax Emulsion |
4.8 |
| Polypropylene Wax Emulsion |
4.2 |
| Notes: |
| Mix in order listed through Masurf FS-710,
then slowly add Zinc Oxide until "cut in." Add remaining
components in order listed. |
| Masurf FS-710 is used to "cut in" zinc oxide,
and as wetting/leveling agent. |
