|
| |
Personal Care | Products |
|
| |
|
| |
|
|
Products |
| |
|
|
|
| |
Fluoroaliphatic Betaine Fluorosurfactant |
| |
| |
MASURF FS-330 is characterized as a 30% active fluoroaliphatic betaine
fluorosurfactant in a water/isopropanol solution. With typical use
levels of 50-500ppm, MASURF FS-330 is effective at very low concentrations,
and together with traditional hydrocarbon surfactants, can contribute
properties not possible with either material alone.
MASURF FS-330 is a very effective at reducing surface tension, in
aqueous acids, bases and polar solvents. FS-330 is high foaming amphoteric
fluorosurfactant with high hard water tolerance, contributing exceptional
foaming, wetting, spreading and leveling properties to a wide range
of systems.
In Personal Care applications, MASURF
FS-330 is a performance additive in Hair Conditioner and Rinse formulations.
INCI Name: C8-18 Perfluoroalkylethyl
Betaine
|
| Physical form |
Light yellow liquid, with mild alcohol odor |
| Actives content |
29.5 wt% minimum |
| Aqueous surface tension @25°C dynes/cm |
32@ 0.001%, 17@ 0.1%, 17 lowest |
| Interfacial tension (0.1%aq./cyclohexane) |
9 dynes/cm |
| Specific gravity @25°C |
1.08±0.04 |
| pH |
4.0±1.5 |
| Viscosity @25°C |
<100 cps |
| Flash point (TCC) |
23°C |
| VOC content (volatile-water) |
30% (Isopropanol) |
| Storage |
Store above 32°F and below 100°F |
|
| Handling Information |
Refer
to the Material Safety Data Sheet (MSDS) available from Mason Chemical
Company for information on the safe use, handling and disposal of
this product.
MASURF FS-330 is a 30% active fluoroaliphatic betaine fluorosurfactant
in a water/isopropanol solution. FS-330 is an effective wetting and
interfacial tension reducing agent. The formulations below illustrate
this effect.
| Hair Conditioner |
| Ingredients: |
Wt.% |
| Water |
to 100.0 |
| Maquat CETAC-30% (1) |
3.0 |
| Cetyl alcohol |
3.0 |
| Stearyl alcohol |
1.0 |
| Ceteareth-20 |
0.5 |
| Masurf FS-330 |
0.015 |
| Fragrance |
q.s |
| Preservative |
q.s. |
| Procedure: |
| Mix water and CETAC-30%, heat to
65°C. |
| Add Cetyl/Stearyl alcohols, and Ceteareth-20,
heat to 75°C and hold for 30 minutes. |
| Cool to 45°C, add Masurf FS-330, Fragrance
and Preservative. |
|
| (1) Cetrimonium chloride |
Damaged hair, especially permed hair can be difficult to comb, especially
when wet. Hair Conditioner products are generally oil-in-water emulsions
in which the lipophilic conditioning quat is the active ingredient.
The addition of very small amounts of MASURF FS-330 significantly
improves wet comb performance of this formula, and others of it's
type, especially on damaged hair.
Masurf
FS-Fluorosurfactant evaluation guidelines
Masurf FS-Fluorosurfactants are effective at very low concentrations,
typically 50-500 ppm, and can act synergistically with hydrocarbon
and/or silicone surfactants. Evaluate in aqueous formulations at 0.1%
active Masurf FS-Fluorosurfactant initially, then optimize by successively
reducing the FS concentration by ½.
Masurf FS-Fluorosurfactants and Masurf FP-Fluoropolymers do not contain
PFOS/PFOA. Masurf FS and FP products are manufactured with telomerization
process fluoroaliphatic intermediates that do not contain, release
or have been shown to degrade to perfluorooctane sulfonate (PFOS)
or perfluorooctanoic acid (PFOA). |
|
|
|
| |
|
|
|
| |
MAC V.051203 |
|
|
|
| |
| |
|
